High temperature BeltFactors of normal operation of the unit

First of all to ensure that their own conveyor is no problem, high-temperature conveyor belt is only a hub, its operation or rely on the conveyor, the device is good or bad to determine whether the belt can be normal operation of the first factor.

Secondly, whether the belt is matched with the conveyor and whether it is suitable for transporting such goods is the factor that determines the normal operation of the conveyor belt. Whether the belt is intact, whether the problem has been handled, and whether the goods are properly placed on the conveyor belt will directly affect the operation of the conveyor belt.

Again, the operator should have the operation of conveying equipment and maintenance of conveyor belt expertise, find problems, timely repair and timely disposal, the harm is nipped in the cradle.

The normal operation of the tape will affect the production efficiency of the enterprise, to attract attention.

High-temperature conveyor belt during the use of the skin is mainly due to the coating and core between the adhesion and strength of low, resulting in a low viscosity and strength of the main reasons for the following:

1-Core Paste plasticizing after the redirection roller adhered to the dirty things.

2-core paste plastic can not be a good combination with the batter.

The adhesion and strength between the cores are decreased by the plasticizer precipitation in the 3-core paste.

Fragile materials also limit band speed. When the high temperature conveyor belt and the conveying material pass the idler, The powder material should be low enough to be transported with speed. The lower band speed can make the fragile material not to be broken at the loading and unloading points. The heavy edge of the sharp material should be used at medium speed conveyor. Because the edges wear off the conveyor belt, Especially when the charging speed is obviously lower than the conveyor belt speed. Increasing the band speed can reduce the bandwidth and conveyor belt tension. But the benefits will also be weighed against possible belt wear, material runout, airflow resistance, Bearing the support roller large impact, such as the aggravation and conveyor belt all parts of the life of the reduction and other shortcomings.