Imported industrial belt plane belt conveyor toothed belt conveyor network chain wide-angle belt v module mesh belt Teflon mesh belt plane belt Gates profile belt Samsung Belt

Identification of the true and false high temperature textured tape:

High temperature adhesive tape consists of 2 major parts, base materials and glue 2 most of the manufacturers to reduce costs, but also to reduce the price of a method, its real quality greatly discounted; take Kapton high temperature adhesive tape For example, the fake thermal performance or insulation properties are far lower than the real polyimide tape, It actually uses the base material is the brown pet film, coated silica gel, due to the actual application of some industries do not need to be too high, not more than 260 degrees, pet's highest temperature is 220°, so the general situation is not easy to find, even more, using the original is silicone glue and use other glue, Its temperature resistance of up to 150 °.

Advantages of Triangle Belt:

1. The structure is simple, the manufacture, the installment accuracy request is not high, the use maintenance is convenient, is suitable for two axes center distance larger occasion;

2. Stable transmission, low noise, cushion-absorbing effect;

3. Overload, the belt will be in the pulley skid, can prevent the damage of weak parts, play a role in security protection.

Belt Storage

In order to maintain the availability and size of the belt, the power transmission belt must strictly follow its proper storage process.

Many of the early-defunct belts can be found to be damaged before they are installed and are not operated according to the storage process.

If its storage temperature is not more than 30 °, humidity is not greater than 70%, belt storage can still be used after 6 years.

When the storage temperature exceeds 30°, the temperature of each rise 10°, the belt life will fall by about half.

The belt is prohibited from storing in temperatures exceeding 46°, otherwise the belt failure time will be greatly advanced.

If the humidity is more than 70%, fungi and molds are likely to be produced in this environment, which have an impact on the belt performance,