How to choose conveyor belt
Conveyor belt According to the use of the environment and requirements of different types of specifications and models:
1. According to the size of the traffic is divided into: B500 B600 B650 B800 B1000 B1200 and other common models (b for width, mm). At present, the company's largest production capacity of b2200mm conveyor belt.
2. According to the use of different environment, divided into ordinary rubber conveyor belt, heat-resistant rubber conveyor belt, cold rubber conveyor belt, acid and alkali rubber conveyor belt, oil-resistant rubber conveyor belt, food conveyor belt and other models. The ordinary rubber conveyor belt and food conveyor belt covering the minimum thickness of 3.0mm, under the lowest cover plastic 1.5mm, heat-resistant rubber conveyor belt, cold rubber conveyor belt, acid-alkali rubber conveyor belt, oil-resistant rubber conveyor belt covering the minimum thickness of the plastic is 4.5mm, the lower covering the minimum for 2.0mm. According to the specific conditions of the use of the environment can be 1.5mm to increase the thickness of the upper and lower cover adhesive service life.
3. According to the conveyor belt cloth layer tensile strength is divided into ordinary canvas conveyor belt, strong canvas conveyor belt. Strong-type Canvas conveyor belt is divided into nylon conveyor belt (NN conveyor belt) and polyester conveyor belt (ep conveyor belt).
I pine company in the use of customer reference to some foreign experience developed, a variety of pattern conveyor belt and bulkhead conveyor belt, specific description as follows:
Pattern Conveyor Belt Introduction:
Pattern conveyor belt is composed of body and pattern parts, due to the different materials and conveyor dip size, the requirements of the shape and height (depth) are also different. Commonly used pattern conveyor belt varieties are as follows:
Herringbone pattern
Features: With the surface is higher than the "person" font pattern, but the opening is also closed, each pattern can be divided into high, medium and low three kinds.
Application: Suitable for ≤40 degree inclination of powdery, granular, small pieces of material conveying, can also be transported bagged materials.
Stripe pattern
Features: Belt surface with a high horizontal stripe pattern, divided into high, medium and low three kinds of patterns, each pattern can be divided into sparse, dense and other forms.
Application: Apply to the horizontal conveying package of ≤30 degree inclination. If in the Groove case, can replace the human font pattern.
Granular pattern
Features: The belt surface has a high out of the belt body or concave embedded with the grain pattern, but also can be made into square hole-shaped or prism and cloth shape.
Uses: The convex granular pattern applies to the soft package or needs to have the grasping effort the material conveyance (for example cardboard box) or does not have the slip conveyance.
The concave-pit-shaped granular pattern is suitable for transporting granular material with ≤45 inclination.
Fan pattern
Features: With a half-fan (or 1/4 round) pattern on the belt surface. When the tape into the groove, the pattern is disturbed into a fan (or semicircle), a high pattern class.
Application: It is suitable for conveying powder, granule and block material of ≤60.
The company can supply pattern conveyor belt width of ≤2400mm.
Pattern conveyor belt is composed of two parts, the base belt and the pattern, due to different transport materials and the size of the conveyor dip, the requirements of pattern shape and height are also different. Commonly used pattern conveyor belt varieties such as: Herringbone pattern conveyor belt, eight patterns conveyor belt, fish bone pattern conveyor belt, U-shaped pattern conveyor belt, cylindrical pattern conveyor belt, Hemp point pattern conveyor belt. or according to user requirements design, suitable for less than 30 degrees dip in the powder, granular, and bulk material transport.
Large Dip conveyor belt/dj Large dip angle wave-shaped edge conveyor belt
The large dip-angle wave-shaped retaining band is composed of 3 parts of radical belt, retaining edge and transverse clapboard. The blocking edge prevents the material from measuring and slipping. For the convenience of bypassing the drum, the edge of the profile is designed to ripple; the function of the diaphragm is to prop up the material, and the T-TC type is adopted in order to realize the large inclination conveying. The gear side and the diaphragm are connected with the baseband with the two times vulcanization method, and have high connection strength.
Product Features (ordinary type of large dip wave-shaped edge conveyor belt):
1. Increase the conveying angle (30~90度);
2, small footprint, less investment;
3, the transportation volume is big, the promotion height is higher;
4, from horizontal to inclined (or vertical) can smooth transition;
5, suitable for conveying easily scattered powdery, granular, small block, paste and liquid-like materials;
6. Low energy consumption, simple structure, high tape strength and long service life.