Gates Profile BeltThe use of acoustic device in the operation of the two-sided teeth synchronous movement of the size and quality of the inspection, the belt even if there is a slight peel and other damage, will also emit abnormal sound and irregular sound, with the acoustic detector can be distinguished.

The use of sound in the operation of the movement of the belt and the size of the sound quality inspection, even if the belt has a slight peel and other damage, will also emit abnormal sound and irregular sound, with the acoustic detector can be distinguished.

Listening

The use of hearing to identify irregular operations is a very common method. For example, the use of an electronic stethoscope to find out the abnormal noise of a 10-piece is often the method used by experienced manipulators.

A low purring sound will be emitted if the belt is in a good connecting state. If a sharp hiss, squeak, and other irregular sounds, it often means that the belt is in a bad connecting condition.

The sharp squeak noise may be caused by improper lubrication. Improper belt clearances can also cause metallic sounds. The grooves in the concave track on the outer ring track of the two-sided teeth can cause vibration and cause smooth and crisp sound. If the damage caused by the installation will also produce noise, this noise will follow the height of the belt speed and different.

Intermittent noise indicates that the moving piece may be damaged. This sound occurs when the damaged surface is rolled out and the two-sided teeth are in sync with a contaminant that often causes a hissing sound. Severe damage to the same bearing can produce irregular and loud noises.